I-Original Fujitsu FTP-627MCL401 i-Thermal Printer Mechanism
FTP-627 MCL Series 24V eqhutywa high-speed abashicileli kunye ultra low profle auto cutter kunye nobomi obude.
FTP-627 MCL Series ingasetyenziselwa ezahlukeneyo izicelo, ezifana iitheminali POS, oomatshini bokuthengisa amatikiti, abashicileli ileyibheli, iitheminali zebhanki, kunye nomlinganiselo kunye nezixhobo zonyango.
• Iprofayile ephantsi kakhulu
Ukuphakama 21.8 mm, ububanzi 81.2 mm, ubunzulu 42.2 mm
• Ushicilelo olukhawulezayo
Inokushicilela kwi-100/150/200mm/s (800/1200/1600 dotlines/s) ubuninzi ngokusebenzisa ulawulo olulodwa lwentloko ye-Fujitsu.
• Umsiki ozenzekelayo
Ubomi obude kunye nesitayela esiphezulu esithembekileyo se-guilotine sokusika i-auto (ngokusikwa okupheleleyo / okuyingxenye) ngemoto ezinikeleyo.
• Iphepha elilula
Ukukhutshwa kwe-lever platen yethu kuvumela ukufaka iphepha ngokulula.
• Indlela yephepha egotyiweyo
• Ipleyiti yokubona iswitshi
• Isakhelo se-die-cast ezininzi
Isakhelo esimagingxigingxi se-die-cast sibonelela ngentsebenzo egqwesileyo ye-ESD, iyothuswa/ixhathisa ukungcangcazela kunye ne-heat-sink ivumela ukushicilelwa okuqhubekayo.
• Iyahambelana neRoHS
• Iirejista zemali
• Iitheminali ze-EFT POS
• Iimpompo zegesi
• Iitheminali zebhanki
• Izixhobo zokulinganisa kunye nabahlalutyi
• Izixhobo zonyango
| Into | FTP-627MCL401 | ||
| Ujongano | Ihambelana ne-RS232C / Centronics / USB | ||
| Ukunikezwa Amandla | Yentloko yoshicilelo | I-MCL401 MCL411 | 24 VDC umndilili wangoku, 0.5A (0.9 A incopho) (print ratio: 12.5%, print isantya 100mm/sec.) |
| MCL601 | 24 VDC umndilili wangoku 1.0 A (1.9 A incopho) | ||
| Yemoto | MCL401/411 | 24 VDC ±5%, 1 Ubuninzi | |
| MCL601 | 24 VDC ±5%, 1.1 Ubuninzi | ||
| Kuba umsiki | MCL401 | 24 VDC ±5%, 1 Ubuninzi | |
| MCL411/601 | 24 VDC ±5%, 1.3 Ubuninzi | ||
| Ngengqiqo | MCL401/601 | 3.3 ukuya ku-5.25 VDC, 0.1 Ubuninzi | |
| MCL411 | 2.7 ukuya ku-5.25 VDC, 0.1 Ubuninzi | ||
| Imilinganiselo | Inkqubo kunye nomsiki | 82.5 x 42.2 x 21.8 mm (WxDxH) | |
| Ibhodi yojongano | DSL291 | 70x60x12mm(WkDxH) | |
| DSL4xx | 96 x 52 x 21.2mm (WxDxH) | ||
| DSL6xx | 95x70x21.6 mm (WxDxH) | ||
| Ubunzima | Inkqubo kunye nomsiki | Ngokumalunga ne-97-107g | |
| Ibhodi yojongano | Malunga ne-50g | ||
| Inombolo yendawo | FTP-627MCL401/411/601 | ||
| Indlela yoshicilelo | Indlela yechaphaza ye-Thermal-line | ||
| Ulwakhiwo lwamachaphaza | 432 amachaphaza/umgca | ||
| Ichaphaza lechaphaza (elithe tye) | 0.125 mm (8dots/mm) – ukuxinana kwamachaphaza | ||
| Ichaphaza lechaphaza (nkqo) | I-0.125 mm (8dots / mm) - i-pitch feed pitch | ||
| Indawo yokushicilela esebenzayo | 54 mm | ||
| Inani leekholamu | ANK 36 ikholamu/umgca (ubuninzi. 12/24 ifonti yamachaphaza) | ||
| Ububanzi bephepha | 58 mm | ||
| Ubukhulu bephepha | 60 ukuya 85pm (elinye iphepha kolu luhlu ma ngokungasetyenziswa ngenxa yeempawu zephepha) | ||
| Isantya soshicilelo | MCL401 | Ubuninzi 100mm/sec.(800dot line/sec.) | |
| MCL411 | Ubuninzi 200mm/sec.(1,600dot line/sec.) | ||
| MCL601 | Ubuninzi 150mm/sec.(1,200dot line/sec.) | ||
| Iintlobo zabalinganiswa | Alphanumeric, kana: 159 iindidi Abalinganiswa International: 195 uhlobo JIS Kanji (Kanji CG elayishiwe ibhodi): malunga 6800 iintlobo | ||
| Umlinganiswa, imilinganiselo, (WxH), inani leekholamu | 12 x 24 amachaphaza, (1.5 x 3.0 mm), 36 iikholamu: ANK 24 x 24 amachaphaza, (3.0 x 3.0 mm), 18 iikholamu: ANK 8×16 amachaphaza, (1.0 x 2.0 mm), 54 iikholamu: ANK 16 x 16 amachaphaza, (2.0 x 2.0 mm), 27 iikholamu: ANK | ||
| Ubomi | Intloko | MCL401 | Ukuxhathisa kwePulse: 50 yezigidi zeepulses/dot (print ratio: 25%). |
| MCL411 | Ukuxhathisa kwePulse: 150 million pulses/dot (print ratio:25%). | ||
| MCL601 | Ukuxhathisa kwePulse: 100 yezigidi zeepulses/dot (print ratio: 25%). | ||
| MCL401 | Ukuxhathisa i-abrasion: umgama wokuhamba ngephepha 50km | ||
| MCL411 | Ukuxhathisa i-abrasion: umgama wokuhamba ngephepha150km | ||
| MCL601 | Ukuxhathisa i-abrasion: umgama wokuhamba ngephepha 100km | ||
| Umsiki | MCL401 | 500,000 yokusika | |
| MCL411 | 500,000 yokusika | ||
| MCL601 | 1,000,000 yokusika | ||
| Icwecwe | 5,000 amaxesha (vula/vala) | ||
| Indawo yokusebenza | Ubushushu bokusebenza* | 0°C ukuya +50°C | |
| Ukufuma okusebenzayo | I-20 ukuya kwi-85% ye-RH (akukho condensation) | ||
| Ubushushu bokugcina | -20°C ukuya +60°C (iphepha aliqukwanga) | ||
| Ukugcinwa kokufuma | I-5 ukuya kwi-95% ye-RH (akukho condensation) | ||
| Umsebenzi wokubona | Ukufunyanwa kobushushu bentloko | Ifunyenwe yi-thermistor | |
| Ukuchongwa kwephepha/kuphawulwe | Ifunyaniswe sisiphazamisi sefoto | ||
| Ukukhutshwa kweplate | Ichongiwe ngokutyibilika iswitshi | ||
| Iphepha elicetyiswayo lobushushu bobushushu | TF50KS-E4 (iphepha leNippon) | ||
| TF60KS-E (Iphepha leNippon), FTP-020PU001 (58mm), PD150R (iphepha le-Oji), FTP-020PU701 (58mm) | |||
| I-TF60KS-F1 (iphepha leNippon), FTP-020P0102 (58mm), PD170R (iphepha le-Oji), i-P220VBB-1 (iphepha leMitsubishi) | |||
| I-PD160R (iphepha le-Oji), i-AFP-235 (iphepha le-Mitsubishi), i-TP50KJ-R (iphepha le-Nippon), i-HA220AA (iphepha le-Nippon) | |||